ASG Sewing Blog – Page 61

May 1, 2020

Uncommon Threads: Fusible, Invisible & Water-Soluble

Into every sewer’s life, a little novelty must fall, and such is the case with threads—those ones you don’t use every day, but when you need them, they serve a specific purpose.

Fusible Thread

Fusible thread, as its name suggests, is heat sensitive and melts when needed. Much like its notion cousin, fusible web, the thread can provide a thin and targeted line of adhesive. But, where would you use that?

Fusible thread is ideal for matching plaid and stripes at a seamline, as it can hold the design pattern in place while you sew the seam—just align adjacent pieces, fuse and sew. It’s also ideal to keep zippers from moving while stitching a centered application and for holding trims in position. Making a narrow hem? Use it in the bobbin (or serger lower looper) and fuse the hem in place. Need a crisp edge on a pleat or pants crease? Place a strand inside the fold line and fuse. Use it in the bobbin for understitching a facing—then press to help keep it in place.

Fusible thread can be used in the bobbin, in the serger loopers or through a large-eye needle. Test-stitch first to check tension. Use it on the side of the fabric where fusing will be needed for the final application.

A niche product akin to fusible thread is Secura by Coats (members, don’t forget to use your Nancy’s Notions discount!). It’s not a traditional fusible thread, but made specifically for sewing on buttons. When you’re done stitching the button on, touch the thread with the tip of the iron and it fuses to itself for a secure hold.

Invisible Thread

Made from either nylon or polyester, this no-see-um monofilament thread is available in clear and smoke. Usable in the needle and/or bobbin, it’s ideal for appliquéing, sewing on trims, quilting and couching, as the stitches virtually disappear. It’s ideal for allover quilting where stitching crosses multiple colors in a single print, and for stitching in the ditch on garments or trim applications.

If your machine has issues feeding invisible thread, use a thread net or a thread stand for more consistent feeding.

Note that nylon can be stiffer and melts at a lower temperature than its polyester counterpart. It can also discolor and become brittle with age.

Water-soluble Thread

A favorite of quilters, water-soluble thread can be used in the needle, bobbin or lower looper on a serger. It does require a bit of special care—firstly, don’t lick the ends to thread a needle as it will dissolve. Keep it in a sealed bag, especially if you live in a humid climate, and mark it so it doesn’t get mixed up with regular sewing thread.

Water-soluble thread is ideal for basting quilt layers together, then after quilting, it can be removed by washing or simply wetting and brushing, depending on the brand. It can also be used anywhere a temporary hold is needed until more permanent construction can be completed—think basting a garment together for fitting.

~Linda Griepentrog
Linda is the owner of G Wiz Creative Services and she does writing, editing and designing for companies in the sewing, crafting and quilting industries. In addition, she escorts fabric shopping tours to Hong Kong. She lives at the Oregon Coast with her husband Keith, and two dogs, Yohnuh and Abby. Contact her at .

April 24, 2020

Fishy Flounces: Flounced Hem

Normally, fishing line would be found in the tackle box or with rods and reels in the garage, but why not try bringing a spool of it into your sewing room to create awesome ruffled edges and hems with your serger? The secret is encasing the fishing line in the stitching to create undulating edges with aplomb.

Ruffled edges are ideal for eveningwear, costumes and skirt hems. This technique works best on bias edges and on the crosswise of knit fabrics, but it will also work on lengthwise or crosswise edges to a lesser extent.

What kind of fishing line?

Fishing line comes in a variety of weights, types and colors, but for sewing purposes look for a clear, monofilament line between 12 and 60 weight. The larger the number, the thicker the line. If you’re buying one specifically for sewing ruffles, 25-30 is a happy medium, though you might want a lighter weight for thin fabrics like chiffon.

Although not required, check to see if your serger has a beading or other foot that has a top center guide that the fishing line can slide through.

It’s important to test-stitch before you begin serging on the actual project, as this process can be a bit tricky. If you have trouble with uneven feeding and squirmy fabric, add some water-soluble stabilizer under the fabric and serge through it as a temporary aid to even feeding.

Set your machine for a rolled hem setting. Each machine differs slightly, so consult your owner’s manual for specifics.
Leave a 12” tail of fishing line, then begin stitching over only the fishing line. After you’ve serged for about an inch, lift the foot and place the edge of your fabric wrong side up under the line, then continue stitching. It’s helpful to actually serge about ¼” inside the cut fabric edge rather than trying to align the monofilament with the actual fabric edge. Hold the line to guide it along the seamline, but don’t stretch the fabric. The line must rest between the needle and the cutting blade as it’s very important not to cut it.
Serge slowly encasing the fishing line as you stitch. If you accidentally cut into the line, you’ll need to stop, remove some stitches and begin again with a new portion of line, so make every effort not to nick it and maintain one continuous piece around the entire hemline or ruffle edge.
When you reach the end of the edge you’re working with, leave another 12” tail of fishing line. Remove the project from the serger and gently stretch the encased fabric edge for maximum ruffling. Thread some of the fishing line tails back into your stitching, or if it’s a soft, flexible line, tie a knot to secure.

Tip: Be careful pressing over the fishing line, as some of it is nylon and will melt easily.

For more information on serger sewing, see the Serger videos in the Members Only area.

April 17, 2020

Shelter in Place, Save Money and Sew!

You are living your best quarantine life, sewing up a storm and suddenly realize you are out of… or can’t find… or never had… something you need to finish your project. No matter what it is, you have no interest in going out into COVID world to pick up a spool of thread, a rotary cutter blade or a new pair of thread snips to replace the ones you must have dropped into the trash because they are nowhere to be found.

Now what?

Did you realize just how many of these things you can order online with a member discount?

We combed through the entire list of Special Offers just for members on ASG.org and created this table with the companies who carry some frequently needed sewing notions for you to have at your fingertips. Be sure you visit the members only Special Offers page to get the discount code to use when you place your order. Now it’s your turn! Go replenish your supply from the safety of your own home and enjoy great discounts while you do.

Click to open full size pdf file — Click the image to open full size pdf file

~Sheryl Belson

April 10, 2020

Time to Make the Masks

I relate to life in music, TV shows, movies, and media in general. For the past few weeks, when I woke up, I felt as though my life was the movie Groundhog Day. Remember when Bill Murray relived his day over and over again and couldn’t get out of the loop? That’s the way I feel with this Coronavirus quarantine. I am reliving the same day — OK, different date — but the same bad dream EVERY DAY.

Then, this morning I awoke with the old tv commercial from Dunkin’ Donuts bouncing through my thoughts. Do you remember the one where the baker rose every morning with the mantra, “Time to make the donuts. Time to make the donuts?”

My mantra is
“Time to make the masks.”

In the Groundhog Day movie, Bill Murray tried to vary his loop by doing different things and even improved himself along the way. It got me thinking, “How can I vary my mask making?” How can I remove the hum-drum from this mass production sewing project? What can I do to get creative?

Did I forget something?

Another thought also crossed my mind. I have been so focused on making masks to donate to an organization with which I am affiliated, I hadn’t even made any for my family. So now I was on a mission. Masks for the grandkids, kids, hubby, in-laws and maybe even me.

Hubby had already made it very clear that he was far too careful (substitute macho here) for the virus to get him. The teenage granddaughter thought it just wasn’t cool (my word, not hers). And the four year old grandson—a mask wouldn’t make it to his face unless it had an aspect of play involved. Sew, what’s a “sew’r” to do? Customize, of course!

Fabric Stash to the Rescue

I pulled out my fabrics and matched fabric to people.

My youngest grandson at 4 is crazy about dinosaurs and I just happened to have a scrap of dinosaur fabric that was large enough to make the face part of the mask. One down!
Middle grandchild is 9, loves Mickey Mouse and the color red. My stash proved useful again with the themed fabric.
What about that 16 year old? I had made her pajama pants for Christmas, so there were still some scraps of Dr. Who fabric left. It might not be cool to wear a mask, but Dr. Who anything was definitely cool. Since her dad was also a fan of the Doctor, they soon had matching masks.
Mom loves Tigger from Winnie the Pooh and I know there must be some Tigger fabric somewhere (I’m still searching). If that doesn’t turn up, my other son just had me make him pillows with the Marauders’ Map fabric from the Harry Potter movies. Those leftovers would be good for the both of them.
I can’t forget my sister-in-law. She loves chocolate. What would be better than Hershey’s Miniatures fabric?
Finally, what about hubby? He teaches chemistry, but I know I just don’t have anything in the way of test tubes or chemical symbols. What to do, what to do? Just as I was about to give up, I found some fabric with eagles on it. Both our sons are eagle scouts and he works with the scouts on advancement of the eagle candidates. Sounds like another match.

I spent the rest of my day “playing” with my fabric stash. It was fun — really fun remembering all the things I had made with the original purchases and it brought variety to what had been a boring mass production effort. And the results were very special, very unique masks that matched everyone’s personalities. With fashion statements like these, perhaps masks will be viewed as a fashion accessory instead of a health necessity. Can you see it now, designer masks that everyone will soon be wearing? Or perhaps the next challenge in your chapter fashion show? Maybe it will even be the first challenge on next season’s Project Runway.

Oh, and for me, if this virus situation continues, I will soon have a mask to match every outfit!

Stay safe, stay healthy and keep on sewing!

~Rosemary Fajgier

April 3, 2020

Can Silks be Washed?

One of my college classmates was a very recent immigrant from Korea and she once asked me to help her wash her “dance kimono.” Naturally I was eager as it is “common” knowledge that silks should never be washed. What I learned continues to influence my sewing today.

Her kimono was pieced of over 50 strips (up to 3″ in width) of silks, plus bindings (such as strips edging the collar) in different colors. Because the dyes were not colorfast, she had to take the entire kimono apart and wash every color separately, then press and sew back together with long stitches.

Lesson 1

Wash all fabrics separately until you determine whether the dyes are colorfast (like sweatshirts!).

Lesson 2

Don’t complain if a Western-style garment needs to be pressed after washing ─ doing laundry really could be worse.

The collar area was doubled fabric; it did not have a separate interfacing material and the excess was not secured so kimono collar would wrinkle and bunch up if washed.

Lesson 3

Baste or quilt any intact original kimono collar to wash. If making western style garments, make sure interfacings are secured. If deconstructing kimono to re-purpose fabrics, the collar probably has double the visible fabric.

Obi (belt) is generally the most elaborate part of the costume. It is also very stiff, the purpose is partly like a corset. For a light-weight silk, the stiffness is provided by covering a very dense canvas-like fabric, which is always blocked to retain the original size – unless you don’t plan to reassemble the obi.

Lesson 4

Unseen construction materials affect whether silk (or any) garments can be washed, so pre-shrink.

Some silks reveal textures that may not be apparent until wet. These fabrics may have quite subtle matte/shiny differences due to threads that are spun differently and thus shrink at different rates. All of these silks are intended to be blocked when washed.

Lesson 5

If you like texture, enjoy, even if you now have less fabric! Better to adjust plans than to finish and then shrink.

The following are things I’ve learned from deconstructing and re-purposing obi and kimono.

Both obi and kimono fabrics are woven in widths of 10-14 inches, and the garments utilize that to the fullest. The rounded corners of sleeves are left square and not trimmed, with the excess fabrics bunched up in the curved area.

If smaller sizes of kimono are made, seams are made extra wide but not cut off. If extra width is needed an entire extra panel of fabric may be sewn into the side and is not cut or could be half the width, with very wide seam allowances. Extra length will probably be turned up on the inside to replace some of the lining fabric. All of this is to take advantage of taking apart garments to wash, as when re-assembled fabrics can be turned to even out wear or to change the fit/size. No worries if you gain or lose a little weight; alter each time you wash!

Most of the rolls of fabric were made specifically for either obi or kimono, with pre-planned cutting marks. Bolts of fabric are a new concept. This means that the fancy portions of obi could be in the only area(s) that show, while plain fabric is woven for the rest. Do not assume the entire length is what is seen on the outside.

Some fabrics such as brocades and jacquards may fall apart or unravel if cut. This is not a problem for kimono or obi as the fabrics are nearly always left with selvages intact, with the exception of obviously pieced dance and fancy garments.

INSPIRED? Antique Pattern Library has antique kimono fabric designs and stencils in the “J” and “K” sections.

Lesson 6

Test a small cut before re-purposing kimono or obi; particularly be careful if threads are carried on the back. Also examine carefully to locate any possible embroidery and avoid cutting through that area. Embroidery threads may not be colorfast so know it could possibly bleed when washed, particularly true on ornate garments.

Examine carefully if there are any metallics. If painted/stenciled it could be metallic leaf that is not washable as it will flake off. If the metallic is woven in, test first but the threads are probably washable if of the same weight as the other threads. If the metallic threads are heavier or if embroidered, it is probably NOT washable due to the construction method of heavier metallic threads.

There are several ways to use for garments: (1) kimono are wrapped and tied, so many people can wear as open jackets/vests without altering; (2) side inserts can be added to keep the front area intact: use the bottom of long kimono, sleeves, linings, parts from a second kimono, other fabrics; (3) I’ve taken kimono apart completely and re-sewed into large enough blocks to cut Western-style blouses and jackets.

~Hope Wright, ASG Member, Springfield Lincolnland Chapter